Our Turbo Tech Turbine Propeller System® is an advancment in our propeller technology to capture the efficiency of the turbine jet engine. If you have ever looked at a cross section of the turbine jet engine you will see a progression of blades that stack one behind the other. It is this progression of blades and pitch sequence that accelerates the air as each stage feeds from the previous stage. It’s as if each stage takes th air and pushes it again so it gains more and more thrust. Our unique designs let us, for the first time, to stack blades in layers of 3 or more and at proven angle designs that increase airboat engine thrust. Join the Turbo Tech Turbine Propeller System® age and enjoy maximum performance. All props are LXL pattern. LXL hub bolts and prop plate not included.


TURBO TECH TURBINE PROPS FOR AUTOMOTIVE
REDUCTION UNITS SMALL BLOCK & BIG BLOCK
2 STACK HUB SYSTEM 3 PLATES
# Blades
 Prop Length Price Part #
4 72 1506.00 45-72472
6 72 2044.00 45-72602
6 78 2074.00 45-78602
6 84 2074.00 45-84602
8 72 2612.00 45-72802
8 78 2642.00 45-78802
8 84 2642.00 45-84802
3 STACK HUB SYSTEM 4 PLATES
8 72 2642.00 45-72803
8 78 2642.00 45-78803
8 84 2642.00 45-84803
12 78 3788.00 45-78123
4 STACK HUB SYSTEM 5 PLATES
8 72 2672.00 45-72804
8 78 2672.00 45-78804
8 82 2672.00 45-82804
12 78 3788.00 45-78124
5 STACK HUB SYSTEM 6 PLATES
8 78 2672.00 45-78805
8 82 2672.00 45-82805
BLADE WITH NICKEL EDGE
1 72 255.00 45-42000
HARDWARE
42-00360 Protractor 38.00 ea.
42-00600 Spacers 6 x 1/2" LXL Bolt Pattern 30.00 set
42-00601 Spacer 6 x 1/2" LXL Bolt Pattern 6.00 ea.
42-00400 Clamping Block Per Blade Hardware 6.00 set
42-00200 Clamping Blocks Per Blade 8.00 pr.


TURBO TECH TURBINE HUBS
& HARDWARE FOR NARROW BLADES
2 STACK HUB SYSTEM 3 PLATES
# Blades
 Prop Length Hub Only Cost Part #
4 72 365.00 45-20472
6 72 365.00 45-20672
6 78 395.00 45-20678
6 84 395.00 45-20684
8 72 395.00 45-20872
8 78 425.00 45-20878
8 84 425.00 45-20884
3 STACK HUB SYSTEM 4 PLATES
8 72 425.00 45-30872
8 78 425.00 45-30878
8 84 425.00 45-30884
12 78 495.00 45-30278
4 STACK HUB SYSTEM 5 PLATES
8 72 455.00 45-40872
8 78 455.00 45-40878
8 84 455.00 45-40882
12 78 495.00 45-40278
BLADE WITH NICKEL EDGE
1 72 255.00 45-42000
HARDWARE
42-00360 Protractor 38.00 ea.
42-00600 Spacers 6 x 1/2" LXL Bolt Pattern 30.00 set
42-00601 Spacer 6 x 1/2" LXL Bolt Pattern 6.00 ea.
42-00400 Clamping Block Per Blade Hardware 6.00 set
42-00200 Clamping Blocks Per Blade 8.00 pr.

WARP DRIVE HUBS, BLADES, AND HARDWARE
HUBS
# Blades
 Prop Length Hub Only Cost Part #
3 66 to 72 205.00 42-00372
4 66 to 72 255.00 42-00472
5 72 275.00 42-00572
5 78 to 80 320.00 42-00580
6 72 285.00 42-00672
6 78 to 80 325.00 42-00680
6 90 545.00 42-00690
7 78 to 80 335.00 42-00780
8 72 285.00 42-00872
8 78 to 80 345.00 42-00880
10 78 to 80 345.00 42-00080
12 78 to 80 345.00 42-00280
REPLACEMENT BLADEWITH NICKEL EDGE
1 72 255.00 42-42000
HARDWARE
42-00360 Protractor 48.00 ea.
42-00600 Spacers 6 x 1/2" LXL Bolt Pattern 30.00 set
42-00100 Spacers LXL Bolt Pattern 6.00 ea.
42-56325 Clamping Block Hardware Bolts (1), Lock Nut (1), Washers (2) 1.75 set
42-00400 Clamping Block Hardware Bolts (4), Lock Nuts (4), Washers (8) 6.00 set
42-00200 Clamping Blocks (2) 6.00 pr.
42-12400 Prop Bolts For Use on Rotator Reduction Unit: 4" x 1/2" (6) Bolts 1/2" Flat Washers (6), 1/2" Locker Washers (6) 14.00 kit
42-12450 Prop Bolts For Use on Belt Drive: 4 1/2" x 1/2" Bolts (6), 1/2" Flat Washers (6), 1/2" Locker Washers (6) 14.00 kit


WHIRL WIND HUBS, BLADES, AND HARDWARE
HUBS
# Blades
 Hub Only Cost Part #
2 415.00 43-43000
3 965.00 43-00300
4 1250.00 43-00400
REPLACEMENT BLADEWITH NICKEL EDGE
1 415.00 43-43000
HARDWARE
42-00600 Hub Bolt Hardware for Rotator 5" x 1/2" with Washers (6) 16.00 set
42-00650 Hub Bolt Hardware for Belt Drive 5 1/2" x 1/2" with Washers (6) 18.00 set
42-00800 Hub & Blade Bolt 4" x 7/16" 1.60 ea.

 


PROPELLERS FOR AUTOMOTIVE REDUCTION UNITS
SENSENICH
All props are LXL patterns.
LXL hub bolts and prop plate not included.
# Blades
 Prop Length Prop Material Price Part #
2 78 Wood/Kevlar Wide 889.00 41-78222
2 80, 82, 84 Wood/Kevlar Wide 948.00 41-84222
2 90 Wood/Kevlar Wide 998.00 41-9022
2 78 or 80 Composite Wide 1725.00 41-80223
2 82 Composite Wide 1775.00 41-82223
3 78 or 80 Composite Wide 2515.00 41-80323
3 82 Composite Wide 2765.00 41-82323
4 80 or 82 Composite Wide 3305.00 41-82223
4 84 or 86 Composite Wide 3840.00 41-86423
5 84 or 86 Composite Wide 4595.00 41-86523
WARP DRIVE
6 78 to 80 Composite Narrow 1895.00 42-80613
6 90 Composite Narrow 2135.00 42-90613
7 78 to 80 Composite Narrow 2150.00 42-80713
8 78 to 80 Composite Narrow 2425.00 42-80813
8 72 Composite Narrow 2370.00 42-72813
10 78 to 80 Composite Narrow 2885.00 42-80013
12 80 Composite Narrow CALL 42-80213
WARP DRIVE
2 76, 80, 82 Composite Super Duty 1490.00 43-82223
3 76, 78, 80 Composite Super Duty 2190.00 43-80323
4 76, 80, 84 Composite Super Duty 2890.00 43-84433


PROPELLERS FOR AUTO DIRECT DRIVE & AIRCRAFT ENGINES
SENSENICH
All props are LXL patterns.
LXL hub bolts and prop plate not included.
# Blades
 Prop Length Prop Material Price Part #
2 72 Wood/Kevlar Stick 659.00 41-72212
2 66 Wood/Kevlar Stick 495.00 41-66212
2 68 Wood/Kevlar Stick 555.00 41-68212
2 72 Wood/Kevlar Stick 555.00 41-72212
2 72 Wood/Kevlar Wide 790.00 41-72222
2 72, 74, 76 Composite Narrow 1500.00 41-76213
2 66, 68, 72 Composite Narrow 1500.00 41-72213
3 68 or 72 Composite Narrow 1925.00 41-72313
3 72, 74, 76, 78 Composite Narrow 1925.00 41-76313
4 72, 74 Composite Narrow 2720.00 41-74413
WARP DRIVE
3 68 or 72 Composite Narrow 990.00 42-68313
4 72 Composite Narrow 1335.00 42-72213
5 72 Composite Narrow 1600.00 42-72513
6 72 Composite Narrow 1845.00 42-72613
6 78 to 80 Composite Narrow 1895.00 42-80613
WARP DRIVE
2 68, 70, 72 Composite Stump Puller 1490.00 43-72223
2 72 Composite Super Duty 1490.00 43-72223
3 72 Composite Super Duty 2190.00 43-72323
RECONDITIONED PROPS - CALL FOR PRICING
40-40040 Wood Props
41-40400 Sensenich Composite Blades
42-41410 Warp Drive Composite Blades
43-42420 Whirl Wind Composite Blades
45-45450 Turbo Tech Composite Blades


SENSENICH HUBS, BLADES, AND HARDWARE
HUBS
# Blades
 Prop Length Hub Only Cost Part #
2 78 825.00 41-00278
2 80 825.00 41-00280
2 82 875.00 41-00282
3 78 1165.00 41-00378
3 80 1415.00 41-00380
4 78 1505.00 41-00478
4 82 2040.00 41-00482
5 78 2350.00 41-00578
REPLACEMENT BLADEWITH NICKEL EDGE
1 Narrow 450.00 41-41010
1 Paddle 525.00 41-41020
HARDWARE
41-00600 Hub Bolt Set (6) 35.00 set
42-12600 Wooden Prop Bolts For Use on Rotator Reduction Unit: 6" x 1/2" (6) Bolts 1/2" Flat Washers (6), 1/2" Locker Washers (6) 16.00 set
42-12450 Wooden Prop Bolts For Use on Belt Drive: 6 1/2" x 1/2" Bolts (6), 1/2" Flat Washers (6), 1/2" Locker Washers (6) 18.00 set